Tag Archives: FAQ

Differences between Forever-lens and standard full-color projector/logo chip

Forever-lens projector can only use Forever-lens logo chip due to optical and dimensional issues. Details [...]

09
Feb
The LED projector lens barrel had fallen apart, how to put it back together?

The lens barrel consists of 4 optical lens with specification arrangement, you can wipe the [...]

08
Feb
change logo chip for D005, M001, M002
How to change logo chip (D007A, M001/TE001, M002/TE002, M005, M007)?

change logo chip for D005, M001/TE001, M002/TE002   Use a small flat type screwdriver to [...]

08
Feb
D001 change logo chip step 2
How to change logo chip (D001, D007-B/C, TE007-B)?

1. Open D001 (VW, Porche) LED 1. Open D007-B/TE007-B (Mercedes Benz) LED 1. Open D007-C [...]

08
Feb
How to change logo chip for D006 or TE006 (Toyota, Lexus, Infiniti)?

Step 1. Open D006/TE006 LED projector Step 2. Change logo chip Step 3. Put back [...]

08
Feb
The projection become blur, logo chips color faded, why and how to get replacement?

Due to high temperature in car and LED, the logo chips slide color may fade [...]

08
Feb
I have an upside down or turned projection, how to align it up right?

Due to the some car model light wiring and design (or the logo chips alignment), [...]

08
Feb
Why some logo chip slides have different alignment?

Due to the spatial constraint, the logo chip slot of some LED lens barrel is [...]

08
Feb
Why my LED not fitting tight enough?

There are rare occasions that the LED not fitting in tightly possibly caused by hole/part tolerance [...]

08
Feb
Change car door light procedure 5
How to install Wind Fire LED car door projector?

5 Easy Steps To Install Wind & Fire LED Projector   1 1. Slip a [...]

08
Feb